Enquiry
WEICON Plastic Metal UW Mineral Filled Epoxy Resin System for Repairs and Moulding on Wet Surfaces
WEICON UW is a 2-component epoxy resin system with fast curing. It is particularly suitable for repairs and repair works, for example on pipes, pumps, tanks and containers. Due to its special formula, WEICON UW offers very good adhesion even when bonded under water. Therefore, it can be used in the entire marine and inland navigation sector, in wastewater systems and in all applications where moisture and wetness cause difficulties in the bonding process.
Specification
Name
WEICON Plastic Metal UW Mineral Filled Epoxy Resin System for Repairs and Moulding on Wet Surfaces
Brand
Condition
New
| SPESIFICATION | |
| Base | Epoxy |
| Filler | Mineral |
| Texture | Pasty |
| Colour | White |
| Processing Temperature | +15°C to +40°C |
| Component Temperature | >3 °C above dew point |
| Relative Air Humidity | < 85 % |
| Mixing Ratio by Weight | 100:83 |
| Mixing Ratio by Volume | 100:95 |
| Viscosity of the Mixture at +25 °C | 550,000 mPa·s |
| Density of the Mixture | 1.5 g/cm³ |
| Consumption (Layer Thickness 1.0 mm) | 1.5 kg/m² |
| Maximum Layer Thickness per Step | 10 mm |
| Pot Life at 20 °C, 500 g Batch | 30 min |
| Additional Layer After (35 % Strength) | 7 h |
| Working Strength After (80 % Strength) | 12 h |
| Final Strength (100 % Strength) | 36 h |
| Shrinkage | 0.12 % |
