HellermannTyton Heat Shrinkable Cable Repair Sleeve 1000 mm, Shrink Ratio Up to 4.5:1 (100/30 mm), Adhesive Lined, Black
RMS wrap-around sleeves are easy to install. No open cable is needed. The RMS sleeves are wrapped around the cable and closed with a steel channel. The inside of the sleeve is adhesive lined and will effectively seal the cable after shrinkage. RMS sleeves provide fast, watertight and reliable insulation.
To select the right sleeve size, see Application range table. Choose sleeve length so that cable next to damaged area is covered by at least 40 mm of sleeve length.
- Fast, moisture proof and permanent repair of cable jackets
- Only 6 sizes for a wide range of cable diameters: from 10 mm up to 160 mm
- Available in 4 standard lengths and also available in custom lengths.
- Each RMS kit is ready for use and comes with instruction sheet, abrasive cloth strip and cleaning sachet.
- UV and weather resistant. Halogen free.
- TCP (thermo chromatic paint) spots will disappear when sleeve has sufficiently been heated.
Specification
| Cable ⌀ max | 85mm |
| Cable ⌀ min | 35mm |
| Colour | Black (BK) |
| Material | Polyolefin, chemically cross-linked (PO-X) |
| PART DESCRIPTION | RMS 100-30-PO-X-BK |
| Package Content | 500.0mm |
| Product Family | RMS |
| Product Group | Heat shrinkable cable repair sleeves |
| Short Description | Heat Shrinkable Cable Repair Sleeve 500 mm, shrink ratio up to 4.5:1 (100/30 mm), adhesive lined, black |
| Shrink Ratio | up to 4.5:1 |
| Type | RMS 100-30 |
| UV-Stabilised | Yes |
| Variant | Shrink Cast |
| Weight/Unit | 0.3912kg |
| With inner glue (Yes/No) | Yes |
| For Object Outside Diameter | 44-86 mm |
| Length (L) | 500.0mm |
| Longitudinal Change After Shrinkage | -10% max. |
| Recov. ⌀ d max. | 30.0mm |
| Supplied ⌀ D min. | 100.0mm |
| Wall (WT) | 2.54mm |
| Adhesive | Hot melt adhesive |
| Dielectric Strength | 30kV/mm |
| ELV compliant (Article 4 - 2) | Yes |
| Halogen-free | Yes |
| Hazardous Goods | No |
| Limited Fire Hazard | No |
| Min. Shrink Temperature - °C | +110 °C |
| Operating Temperature | -40 °C to +120 °C |
| Pre-Printed | Yes |
| ROHS compliant | Yes |
| Softening Point Adhesive | +105 °C |
| Specifications |   |
| Tensile Strength | 17.5MPa |
| UL Listed (US and Canada) | No |
| UL Listed (US) | No |
| UL Recognized (US and Canada) | No |
| UL Recognized (US) | No |
