GRACO XTREME Z45 & Z25 Electric Waterproofing Sprayers G24X450
Improve surface quality, get better job efficiency
The Graco Xtreme Z45 and Z25 Electric Waterproofing Sprayers are a smart alternative to manually applying waterproofing materials with rollers. They produce a smooth, consistent, evenly distributed spray pattern – which results in less cracking, bubbling and rework.
Reduce labor costs by up to 40%
Working with a manual paint roller, one worker can complete 200 square meters of an external wall each day. The labor cost is $0.25 USD per square meter per person. With an Xtreme Z45, which requires three people, a crew can complete more than 1000 square meters of an external wall per day. The labor cost is reduced to $0.15 USD per square meter per person.
Portable, lightweight and easy to move
Take it anywhere. The Xtreme Z45 and Z25 weighs just 104 kg, so you can transport them through narrow doorways and up flights of stairs, as well. They operate on 230 volt 1-phase power, which is convenient and required on all jobsites.
- Sprays waterproofing materials evenly with a smooth, consistent spray pattern
- Improves surface quality – less cracking, bubbling and reduced rework compared to manual rolling
- Reduces labor costs by up to 40% compared to manual rollers
- Portable and lightweight – just 106 kg
- Uses 230 volt single phase power
| Electric High Pressure Airless Sprayer | |
| US |
Metric |
| Maximum fluid working pressure (Models: 24X450, 24X451, 24Y452) |
31 MPa, 310 bar |
| Maximum fluid working pressure (Models: 24W315, 24W316, 24Y317, 25A829) |
17.9 MPa, 179 bar |
| Stroke length |
120 mm |
| Maximum continuous cycle rate (To prevent premature pump wear, do NOT exceed maximum recommended speed of fluid pump) |
33 cycles per minute |
| Weight |
104 kg |
| Wetted Parts | |
| Models 24X450, 24X451, 24Y452,24W315, 24W316, and 24Y317 |
Carbon Steel, Alloy Steel, 304, 440 and 17-PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum |
| Model 25A829 |
Carbon Steel, Alloy Steel, 304, 440 and 17-PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Aluminum |
| Ambient operating temperature range |
-5° to 50° C |
| Maximum fluid temperature |
See Model Information. |
| Input voltage |
200-240 VAC, single phase, 50/60 Hz |
| Input current |
20A maximum |
| Sound pressure |
74 dB at maximum cycle rate |
| Oil capacity* |
0.9–1.1 liters |
| Oil specification |
Graco part number 16W645 ISO 220 silicone-free synthetic EP gear oil |
| Inlet/Outlet Sizes | |
| Fluid inlet size |
1-1/4 npt(m) |
| Fluid outlet size |
3/8 npt(m) |
| Hose Requirements | |
| Minimum pressure |
31 MPa, 310 bar |
| Minimum length |
15 m |
| Minimum ID |
10 mm |
| Maximum resistance per ISO 8028 |
30,000 /M |
