Enquiry
- Ideal for small to medium projects such as terraces, pools, balconies,
tanks, truck bedliners, secondary containment and waterproofing - Heats material fast for better productivity
- Portable, compact and easy to maneuver
- Easy to use
- Uses standard residential electrical outlet
- Affordable
| Reactor E-10hp | |
| Maximum fluid working pressure |
20.6 MPa, 206 bar |
| Maximum spray pressure: 120 V |
15.2 MPa, 152 bar |
| Maximum spray pressure: 230 V |
17.2 MPa, 172 bar |
| Maximum fluid temperature |
77°C |
| Maximum ambient temperature |
48°C |
| Maximum output |
3.8 liters/min |
| Output per cycle (ISO and RES) |
0.014 liters/cycle |
| Air inlet |
1/4 in. quick-disconnect industrial type pin fitting |
| Air outlet |
1/4 npsm(m) |
| Overpressure relief |
Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks |
| Gun compressed air requirements |
Fusion Gun (purge air and operating air): 4 scfm (0.112 m³/min) |
| Maximum hose length |
32 m |
| Tank capacity each (nominal) |
22.7 liters |
| Weight (empty) |
108 kg |
| <b >Recommended Mix Chamber Sizes | |
| Fusion® Air Purge |
000, AW2222 (00 and 01 at reduced spray pressure) |
| Probler® P2 |
AA (00 and 01 at reduced spray pressure) |
| <b >Electrical Requirements | |
| 120 V |
120 VAC, 1 phase, 50/60 Hz, 3840 W; requires two separate, dedicated 20 A circuits. Full load peak amperage 16 A per circuit |
| 230 V |
230 VAC, 1 phase, 50/60 Hz, 5520 W; requires two separate, dedicated 15 A circuits. Full load peak amperage 12 A per circuit. |
| Generator Size | |
| 120 V |
5000 W minimum |
| 230 V |
7500 W minimum |
| Heater Power | |
| 120 V |
3000 W during recirculation, 2000 W during pressure spray mode |
| 230 V |
4000 W during recirculation, 2760 W during pressure spray mode |
| Sound Pressure | |
| In fast recirculation mode |
71.3 dB(A) |
| Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) |
85.6 dB(A) |
| Sound Power Sound power measured per ISO-9614-2. | |
| In fast recirculation mode |
79.9 dB(A) |
| Measure at 2500 psi (17 MPa, 172 bar), 1 gpm (3.8 lpm) |
93.3 dB(A) |
| Fluid Outlets | |
| ISO Side |
-5 JIC male |
| RES Side |
-6 JIC male |
| Fluid Circulation Returns | |
| ISO side |
-5 JIC male |
| RES side |
-6 JIC male |
| Hose Markings | |
| ISO side |
Red |
| RES side |
Blue |
| Wetted Parts | |
| Wetted parts on all models |
Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene |
